Code: Select all
[source]
device_type = gem
ip_read = true
ip_host = 10.0.0.236
ip_port = 80
ip_mode = client
INCLUDE_CURRENT = 1
REVERSE_POLARITY = 1
ip_poll_interval = 30
TRUST_DEVICE_CLOCK = 1
So then I decided to see if I can add home assistant to the mix. All the threads I reviewed though seem to have a DASHBOX involved which I do not have.
To get things setup for Home assistant I made the following changes. I added a server destination and port to the GEM network utility.
Setup as seen below. In the packet send area of the GEM webpage I turned keep alive on and set the packet type to BIN32NET. And this work for getting data into home assistant, but BTMON then wasn't working right.
If I put the packet type back to BIN48NET BTMON works but Home assistant doesn't collect data any longer. So is there something I am missing?
In order for Home assistant to read the data I think the packet needs to be in BIN32NET format as far as I can tell. But that then makes it so BTMON can't get a proper reading.
So the problem is I can't have BTMON and HA getting data at the same time as I can only set one packet format.