Published Article on My Setup with Brultech

Working on a home project? Post it here.
Post Reply
mark_anderson_us
Posts: 61
Joined: Thu Oct 28, 2010 6:17 pm

Published Article on My Setup with Brultech

Post by mark_anderson_us » Mon Dec 19, 2011 5:45 pm

Hi Guys

I just had a new aritcle published on residentail power monitoring. All done with brultech: http://www.hometoys.com/ezine/11.12/and ... /index.htm

Hope some of you find it useful

Regards

mark
mark_anderson_us
Posts: 61
Joined: Thu Oct 28, 2010 6:17 pm

Re: Published Article on My Setup with Brultech

Post by mark_anderson_us » Wed Sep 25, 2013 8:25 am

siamon wrote:It now is capable of posting "net" values to Google PowerMeter, with displayed consumption displayed as positive or negative values. The Google stats reflect the net value, for example: Monday July 19 -1.28 kWh used (meaning a net excess of 1.28 kWh was sold to the power company). The data to Google PowerMeter data also includes "Energy used by all loads", "Energy Generated", "Total Energy to the grid", "Total Energy from the grid"..... a seperated chart/stats for each, in addition to the standard individual panel circuit loads monitored.
Google PowerMeter has been dead for 2 years
ben
Site Admin
Posts: 4254
Joined: Fri Jun 04, 2010 9:39 am

Re: Published Article on My Setup with Brultech

Post by ben » Wed Sep 25, 2013 9:46 am

Another bot, banned it. They take small slightly relevant pieces of text and post them.

Ben
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Post Reply