Page 1 of 1

Published Article on My Setup with Brultech

Posted: Mon Dec 19, 2011 5:45 pm
by mark_anderson_us
Hi Guys

I just had a new aritcle published on residentail power monitoring. All done with brultech: http://www.hometoys.com/ezine/11.12/and ... /index.htm

Hope some of you find it useful

Regards

mark

Re: Published Article on My Setup with Brultech

Posted: Wed Sep 25, 2013 8:25 am
by mark_anderson_us
siamon wrote:It now is capable of posting "net" values to Google PowerMeter, with displayed consumption displayed as positive or negative values. The Google stats reflect the net value, for example: Monday July 19 -1.28 kWh used (meaning a net excess of 1.28 kWh was sold to the power company). The data to Google PowerMeter data also includes "Energy used by all loads", "Energy Generated", "Total Energy to the grid", "Total Energy from the grid"..... a seperated chart/stats for each, in addition to the standard individual panel circuit loads monitored.
Google PowerMeter has been dead for 2 years

Re: Published Article on My Setup with Brultech

Posted: Wed Sep 25, 2013 9:46 am
by ben
Another bot, banned it. They take small slightly relevant pieces of text and post them.

Ben