Hi,
I a trying to find an alternative to the Etherport as I can't have Brultech to send me one.
Do you guys know if any serial to ethernet device will work with the ECM1240 ?
I have found this one : http://www.hexin-technology.com/RS-232_ ... t-252.html at 50 $ on ebay. Would that work ?
Thanks for your comments
JV
Hardware : Alternative device to Etherport
-
- Posts: 4
- Joined: Sat Jun 25, 2011 3:32 am
-
- Site Admin
- Posts: 4266
- Joined: Fri Jun 04, 2010 9:39 am
Re: Hardware : Alternative device to Etherport
It looks like it could work. You'd need to change the serial settings to:jvl wrote:Hi,
I a trying to find an alternative to the Etherport as I can't have Brultech to send me one.
Do you guys know if any serial to ethernet device will work with the ECM1240 ?
I have found this one : http://www.hexin-technology.com/RS-232_ ... t-252.html at 50 $ on ebay. Would that work ?
Thanks for your comments
JV
Baud: 19200
Data Bit: 8
Parity: None
Stop Bit: 1
Flow: None
and set it to TCP Client Mode.
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com