My wife and I are still "discussing" how many channels we need to monitor
to get the level of detail we want, but one of the likely scenarios is shown in
the attached diagram.
This requires 2 split 200 CTs on one channel of a 1220 and 2 split 100s on
the other channel. I know this can be done from previous discussions but
I need some details on how to connect them to each other and to the plugs:
Specifically, are resistors required and if so, of what values? A simple diagram
would be helpful.
The split 200s were purchased with the 1220 and the split 100s came with
the new 1240 last week.
Thanks,
Mike
Connecting multiple CTs to plug style 1220
-
- Posts: 17
- Joined: Sat Jul 17, 2010 10:32 pm
Connecting multiple CTs to plug style 1220
Satisfied Brultech customer since 2008.
-
- Site Admin
- Posts: 4266
- Joined: Fri Jun 04, 2010 9:39 am
Re: Connecting multiple CTs to plug style 1220
See the attached diagram for information on how to connect the CTs to a 3.5 MM stereo plug.
- Attachments
-
- Two CTs on one channel.png (684.64 KiB) Viewed 6347 times
Ben
Brultech Research Inc.
E: ben(at)brultech.com
Brultech Research Inc.
E: ben(at)brultech.com
-
- Posts: 17
- Joined: Sat Jul 17, 2010 10:32 pm
Re: Connecting multiple CTs to plug style 1220
Thanks Ben. That should be easy to put together.
Mike
Mike
Satisfied Brultech customer since 2008.